Get rid of annoying mould!
Information about mould
There are many reasons for mould damage in living spaces, including insufficient ventilation, lack of heating or structural defects.
If there are structural defects, these must first be rectified.
Particularly old and poorly insulated buildings with lots of thermal bridges are susceptible to mould.
Moisture is always the trigger!
Mould in your home – just an aesthetic problem or a health hazard too?
❌ First, the bad news❌
Many studies cite a link between exposure to mould and respiratory problems. Because when we inhale its spores and metabolic products in the air, we can have an allergic reaction or experience irritation. At a certain level, mould in the home can therefore be a health hazard.
Among other things, mould can also
Have a carcinogenic effect
Damage the lungs and bronchi
Damage the central nervous system (have a neurotoxic effect)
Damage the immune system (have an immunosuppressive effect)
Damage genetic material (have a mutagenic effect)
Damage a foetus (have a teratogenic effect)
Cause organ damage (e.g. cause liver or kidney damage (hepatoxic or nephrotoxic)
Cause skin and mucous membrane damage (from skin irritation to necrosis) on contact
Inhibit or initiate enzymatic metabolic processes
Trigger allergic reactions
Cause fertility disorders through hormonal effects
It is still unclear what concentration of mould in the air is enough to cause negative health effects.
What seems clear to the scientists, however, is that basically all mould triggers allergic reactions in susceptible people.
The good news is we have the solution!
Developed by us – your solution to tackle mould!
SchimmelSchock 4.0 is an active interior wall paint to tackle mould. It was developed especially for the professional trade and has proven itself for many years in a master painter’s workshop.
Countless practical experiences have prompted us to also have the effectiveness and long-term protection examined scientifically by renowned German testing laboratories.
Two independent laboratories, including the accredited testing laboratory for microbiology “Quality Labs BT GmbH” and “MTC Dr. Brünke” have verified the effectiveness and long-term protection of SchimmelSchock 4.0.
SchimmelSchock 4.0 is available as:
- An innovative spray can which can be easily applied on surfaces up to approx. 1.2m2
- A classic 4.5 litre container for surfaces up to approx. 18m2
Spray can
SchimmelSchock 4.0-Spray is a dispersion-based spray paint for wall and ceiling surfaces according to DIN EN13300 and is used to remove all types of mould.
Intended use: Suitable for various surfaces (plaster, concrete, limestone sand, woodchip wallpaper, mineral paint, old paint, plasterboard).
1 can of SchimmelSchock 4.0 is enough to cover an area of approx. 1.2m2 with two coats.
Product description
SchimmelSchock 4.0 in the spray can does not contain any solvents and offers active mould control without the need for preparatory work featuring easy, clean handling and a professional product quality. The spray can be sprayed directly onto mould infestation without brushes, tools or any equipment, covers the area immediately with a short drying time and removes mould permanently.
SchimmelSchock 4.0 replaces three commercially available products for acute mould control / mould aftercare and offers optimal restoration properties. This 3-in-1 product is not alkaline.
SchimmelSchock 4.0 spray is optimally suited for small problem areas in every household.
Overview of the benefits
- No paint rolling
- No mess
- No difficult handling like in application from buckets or small containers
- No pretreatment such as with toxic chlorine bleach and / or sanding off the mould
- Mould-free surfaces in just a few minutes
- Water-based, solvent-free, plasticiser-free, low-odour
- Effectiveness verified by testing laboratories
- Many years of experience in professional trade
- Excellent long-term protection even with extreme contamination
- Simple, clean and safe to use
- Ready-to-use product
- Clean colour gradient thanks to a flowing transition via spraying
- Can be used multiple times
- User-friendly explanatory and user video
Container
SchimmelSchock 4.0 is a dispersion-based paint for wall and ceiling surfaces according to DIN EN13300 and is used to remove all types of mould.
Intended use: New and renovation coatings, mould-free and mould-contaminated surfaces. Suitable for various surfaces (plaster, concrete, limestone sand, woodchip wallpaper, mineral paint, old paint, plasterboard)
Product description
SchimmelSchock 4.0 does not contain any solvents and provides active mould control and mould prevention with the property profile of high-quality interior wall paints. Both professionals and DIY enthusiasts benefit from very good wall paint application properties. SchimmelSchock 4.0 replaces three commercially available products for acute mould control / mould aftercare and can be applied directly onto any mould. This 3-in-1 product is not alkaline.
SchimmelSchock 4.0 is equally suitable for new coatings and renovation coatings.
1 container with 4.5 litres of SchimmelSchock 4.0 is enough to cover an area of approx. 18m2 with two coats.
Overview of the benefits
- Easy to apply
- No pretreatment such as with toxic chlorine bleach and / or sanding off the mould
- Effectiveness verified by testing laboratories
- Many years of experience in professional trade
- Excellent long-term protection even with extreme contamination
- Simple, clean and safe to use
- Water-based, solvent-free, plasticiser-free, low-odour
- Optimum restoration properties
- Can be mixed to the desired shade by adding max. 5% of commercially available tinting paint / concentrate
- Stray light optimised
- Can be used immediately after stirring
Wirkung und Produktsicherheit
Der erste Sprühauftrag von SchimmelSchock 4.0 kapselt die Sporen und bindet diese in die Farbmatrix ein, eine ungewollte Freisetzung der Lungengängigen Schimmelsporen wird somit unterbunden.
Der zweite Sprühauftrag erzeugt bei Kontakt mit Mikroorganismen eine antibakterielle Oberfläche, diese wirkt aktiv gegen Schimmel und zerstört ihn eigenständig bevor er sich ausbreitet und sichtbar wird.
SchimmelSchock 4.0 wurde mehrfach geprüft und die Wirksamkeit bestätigt.
In einem 5-Jahres-Langzeittest konnte man die Langzeitwirkung von SchimmelSchock 4.0 hinsichtlich Schimmelpilzen auch aus wissenschaftlicher Sicht, unter Einhaltung international anerkannter Prüfnormen beweisen.
Effectiveness assessment
We take our promise seriously. That’s why we’ve had two different independent laboratories test the effectiveness for user safety of our product SchimmelSchock 4.0.
Both laboratories certified the effectiveness of SchimmelSchock 4.0.
A long-term assessment of 5 years confirms the active long-term protection; even after 5 years, no mould infestation was found.
The surface to which SchimmelSchock 4.0 was applied was still perfectly clean and fully functional in its fifth year!
![Mikroskop Brünke[2]](https://schimmelschock40.com/wp-content/uploads/elementor/thumbs/Mikroskop-Bruenke2-q14uzr1idu2yxi0uanjkzkhmj9vzh1iyiz274dt6sg.jpg "Mikroskop Brünke[2]")
